Glenyboy Posted March 7, 2011 Report Posted March 7, 2011 (edited) Hi there, I'm just about to do so me wiring on my shee, new lights and a dc conversion and was wondering what wire to use? Theres a shop that has automotive wire and it comes in two grades 1mm 16aamp and 2mm 25amp, also these are both 12V wires will they be ok for a dc conversion as I've read they can go up to 14V. Help is highly appreciated. Edited March 7, 2011 by Glenyboy Quote
bonerific250 Posted March 7, 2011 Report Posted March 7, 2011 You should be alright wires.charging is around 13.5-14.0 volts. I would run an inline fuse with it depending on wire size. I'm sure someone on here that has done this will give more and better info. Quote
Snopczynski Posted March 7, 2011 Report Posted March 7, 2011 You should be alright wires.charging is around 13.5-14.0 volts. I would run an inline fuse with it depending on wire size. I'm sure someone on here that has done this will give more and better info. I personally did my dc conversion with 14 gauge wire. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.