ironmike Posted February 7, 2011 Report Posted February 7, 2011 getting ready to fire my bike up and need to know oil fuel mix ratio Quote
springer Posted February 8, 2011 Report Posted February 8, 2011 20:1 is safe and most people run it. That is what I run. I have heard a lot of people run 32:1 without any problems. Hope this helps. Quote
n2otoofast4u Posted February 8, 2011 Report Posted February 8, 2011 20:1 is what we run.. NO difference on the dyno, and helps against corrosion.. This will actually cause the bike to run richer than say 32:1 or 40:1... At one time we ran 100:1, but you had to purge every night.. Quote
shanYE west Posted February 8, 2011 Report Posted February 8, 2011 I run 24-32:1.. depending on how much oil I have available.. lol but usually 24:1 Quote
87sheerips Posted February 8, 2011 Report Posted February 8, 2011 I run 24-32:1.. depending on how much oil I have available.. lol but usually 24:1 lol.... "close enough" Quote
ironmike Posted February 8, 2011 Author Report Posted February 8, 2011 lol.... "close enough" 1 qrt to 5 gals close enough or not Quote
n2otoofast4u Posted February 8, 2011 Report Posted February 8, 2011 one thing that you need to remember, be sure you have a chian on the bike, and be PREPARRED to have it run away and know what to do if it does.. If its too lean on the idle circuit, it will infact run away and you need to be prepared for that if it does.. Ive seen this happen more than once.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.