Bruce_Blaine Posted January 24, 2011 Report Posted January 24, 2011 Hey guys, built a new motor over the winter. It's a Drag Ported 4 mil stock cylinder. As far as mods go, what else could I get? All I can think of are new clutches...perhaps a lockout/override? Or is that not necesary? MODS: 4mil, drag port stock cyl, cool head, 34mm mikunis, timing plate, t5s, cdi box What else can be done without a new set of cylinders and besides different clutches? Quote
Phelps Posted January 24, 2011 Report Posted January 24, 2011 good reeds? override is nice if you need it, but a stock mod can be great for a all around bike. Quote
Bruce_Blaine Posted January 24, 2011 Author Report Posted January 24, 2011 sorry forgot to mention VF3's. Quote
BigRed350x Posted January 24, 2011 Report Posted January 24, 2011 Better pipes! Ditch the t5's with the drag port. Pick up some shearer pipes, CPI's, snipers, etc. Swap to methanol. Bigger carbs. Drag Axle, marvin shaws, lockup clutch, override trans, outboard bearing support. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.