bobdryerr Posted November 24, 2010 Report Share Posted November 24, 2010 ok so i have my 2-1 intake an a 38mm carb on my shee an has power pros exhaust an vitos reeds an kn cone air filter clamped on carb an she is bored to a 383 non stroker lol. so anyways i took apart the carb to see what sizes jets i have cause its poping an pinging. runs fine at idle then just past 1/4 throttle while on a load falls on its face an dies out. revs just fine without the load. welll to find out i have a 230 main and a 22.5 pilot i believe is whhat it says any ideas what sizes i should be at Quote Link to comment Share on other sites More sharing options...
bobdryerr Posted November 24, 2010 Author Report Share Posted November 24, 2010 so ive been doing some searching around on the net and from what i at i should start at a 42 pilot an a 160ish main. i guess the air stryker has more vacum then normal carbs????? Im confused on where to start now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.