wakullabanshee Posted November 20, 2010 Report Share Posted November 20, 2010 If i try cranking it in gear with clutch in the banshee goes forward but if it in neutral its fine. This is my first banshee so any help would be thankful. Thanks James. Quote Link to comment Share on other sites More sharing options...
87custom Posted November 20, 2010 Report Share Posted November 20, 2010 If i try cranking it in gear with clutch in the banshee goes forward but if it in neutral its fine. This is my first banshee so any help would be thankful. Thanks James. Ger a pancake bearing form vetos http://www.vitosperformance.com/atv_parts/product.php?productid=11515&cat=184&page=1 Quote Link to comment Share on other sites More sharing options...
wakullabanshee Posted November 20, 2010 Author Report Share Posted November 20, 2010 One more thing if I let it warm up its fine. Quote Link to comment Share on other sites More sharing options...
TwistedSheeRida Posted November 20, 2010 Report Share Posted November 20, 2010 Do you have a clymers manual yet? Sounds like the clutch is just out of adjustment, if you have a manual it wll take you through the steps, your going to have to order up some clutch cover gaskets so i would get those first then pull the cover. Quote Link to comment Share on other sites More sharing options...
Josh Z Posted November 22, 2010 Report Share Posted November 22, 2010 One more thing if I let it warm up its fine. or you could be running too thick of oil in your trans. drain it and run atf and change it a little more often. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.