gotta_goatsfast Posted October 16, 2010 Report Posted October 16, 2010 So I've made the decision to step up to a 4mil motor and I've got some bolt on stuff that needs to go. First up is a set of Toomey T5 pipes and silencers. Discoloring and spotty surface rust on bottom portion by the head flange and there's freckles of rust on the stinger tubes. Some tiny dents in the expansion pipes but there's one noticable dent on the right side muffler that faces toward the rear grab bar. My plan is to step up to R2s or CPI pipes for the stroker motor. I'll ship 'em anywhere in the US for $250 obo. Check out the pictures. Here's a pair of 30mm OKO carburetors. I'll throw in some foam UNI filters and outer wears. One of the carbs has a broken brass throttle cable screw on the top. CarbPartsWarehouse has them for $9.00. If I don't get any offers I'll purchase it and throw it on. Ran these on my stock stroke motor and made a HUGE difference once tuned over my tuned trinity single intake. Got a set of 35 Keihins on the way so these gotta go. I'll ship them to ya for $125 as is or replace the part and ship it for $135. Stock crank out of a running banshee. Pulled in favor of a 4mm crank. Threads and tapered ends are good. Picture looks like rust but its actually oil to keep her from rustin. I'll ship it for $50 obo? Here's a pair of stock jugs that will need their first bore/hone. They are currently at 64mm but as you can see the sleeves need freshening. These are an extra set I have that I planned on having ported but I decided to have the jugs on my bike ported instead. $125 gets them to your door. Here's a set of Works shocks that I know little about. They were on the Banshee when I bought it. I know that the middle of the three springs on both shocks are broke and need replaced. The other springs have the powdercoating chipped off and the rubber stop is beat up. The shafts look clean with no pitting. 14.5 inches from center of eye to center of eye. Maybe a good set for someone who knows there way around a shock to tinker with. I'll get them to ya for $50. Last item I have is a stock clutch cover. Has some rash on the insert from the brake pedal. Going with a lock-up clutch so this is useless for me. $35 shipped. Items are located in Albany, Wisconsin (just south of Madison). I'm open for some trades for things I still need for the bike such as lock up clutch and cover or billet clutch basket. I have a Pro-design head, 4mm crank, one piece intake, and VF3s already but anything else you have that I might need for my build hit me up. Thanks for looking! Jimmy Quote
gotta_goatsfast Posted October 17, 2010 Author Report Posted October 17, 2010 Shocks and cylinders are spoken for pending payment. Quote
CGR fmxer Posted October 17, 2010 Report Posted October 17, 2010 Shocks and cylinders are spoken for pending payment. still have the t5s? Quote
gotta_goatsfast Posted October 17, 2010 Author Report Posted October 17, 2010 Shocks will be on their way to Kwietshee Cylinders are on hold until Wednesday pending payment Toomeys, carbs, crank, and clutch cover still up for grabs. CGR: If interested or have any questions shoot me a PM. Quote
gotta_goatsfast Posted October 17, 2010 Author Report Posted October 17, 2010 Pipes sold pending payment. Someone needs a set of carbs, I know they do! Crank and clutch cover haven't been spoken for yet either. Quote
donkeypuncher Posted October 17, 2010 Report Posted October 17, 2010 i'll take the cylinders if deal falls thru... Quote
252wheelieking Posted October 17, 2010 Report Posted October 17, 2010 Pipes sold pending payment. T5 payment sent. Quote
gotta_goatsfast Posted October 17, 2010 Author Report Posted October 17, 2010 Pipes sold and will continue their journey toward 252 shortly. Still got the carb setup, crank, and clutch cover. All reasonable offers will be entertained! Quote
Sandfrk33 Posted October 17, 2010 Report Posted October 17, 2010 These are great prices. Sorry I missed out on the shocks. Free bump for ya Quote
gotta_goatsfast Posted October 17, 2010 Author Report Posted October 17, 2010 Thanks for the bump Sandfrk33. My 4mil build wouldn't be possible if I had to purchase all of MY parts new, so I really owe it to the forums and the members here who've given me a good deal on used-but-functional parts. With that thought in the back of my head, I'd like to keep that spirit when selling parts that I don't need anymore. I know there has been a wave of deadbeat sellers here lately and everyone is more cautious because of it, but I just purchased '200 of bubble wrap and have been scavenging up boxes from Teegan's (my fiance)work preparing to ship out the first wave of parts Monday. Hopefully with enough positive feedback in the for sale section we can really get sellers and buyers motivated again... because I'll be needing some parts in the future! lol Anyways-carb setup, crank, and clutch cover still available and those prices are not set in stone. I'm holding the jugs until end of Wednesday for a member here. Toomeys are bubble wrapped (got a banana box and an egg box I'll try to get them into otherwise I'll make some rounds to the local stores to see what they got) and the shocks are wrapped and boxed ready to go tomorrow. PM me with any questions guys! Quote
gotta_goatsfast Posted October 18, 2010 Author Report Posted October 18, 2010 Kwietshee and 252, check your messages for your tracking numbers. Carb setup- $110 Running stock crank- $40 Clutch cover-$30 Quote
run Posted October 18, 2010 Report Posted October 18, 2010 I have a nice set of R2's Ill sell you at a good price... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.