bad 350 shee sent me a bad set of cylinders

[f00pda3w00p]

so i traded bad 350 shee my fmf ssts and he said all these needs is a hone bullshit. the port work look like someone didnt know what they where doing and the need to be resleeved one of the sleeves is cracked by the exshuast port the the exhuast ports are totally different heights and it looks as thought the piston rings where melting to the cylinder

Edited September 11, 2010 by jdforever12345

[bad 350 shee]

your a lier those cylinders were fine when they left here i said may need bored thats why i sent yoy pistons there was no cracks

[bad 350 shee]

i had these cylinders checked before i sent them out they were good

[Phelps]

jd you can't even tighten a chain, how the hell can you measure a port height? post pic's if you are going to accuse him of selling bad parts. use a white sheet of paper below the cylinders for best lighting of the walls.

[bad 350 shee]

its a fucking trail/dune port and i can give you the name of who did the port work hes 370banshee i dont sell bad parts i had these checked by my builder the day before i shipped them and why is this the first u mention it? i told you everything about them now your calling me out that is bull shit i wil get the port durration for you aswell i shipped them on the 31

[f00pda3w00p]

sending them to redline and having them checked even further and northbend yamaha looked at them the first time will get a letter from redline stating if they are usable or not but from now till then im out a set of pipes and cylinders i went to have these bored yesterday at yamaha but wouldnt because of a fracture in the right cylinder near bottom of exsaust port and port hieghts where not properly alligned not properly alligned that why the cylinders need bored cause the ran really lean and could not fix do to this issue

 

[Phelps]

what retard did the grinding on the gasket surfaces top/bottom of the cylinders? the cylinder walls look like shit and that's why everyone should ask for detailed pic's before they purchase something like this. BAD 350 idk how much you sold these for, but i don't know how you could have had a clear mind about it if you charged over 50 bucks. just my opinion though...

[f00pda3w00p]

seller made it right please delete this topic thank you and i apologize

[ree_ree]

i seen these cylinders today...these things are all fucked up ! i was at the shop when shawn was telling me everything besides the obvious was wrong with them...

[bad 350 shee]

hey did you not just read that i made it right??? then why the fuck post shit like that

[tripledsracing]

hey did you not just read that i made it right??? then why the fuck post shit like that

 

 

i agree!..if u make it right do away with this plus the guy should have omed him before he brought it to here..jmo..

[DUMBASS]

i agree!..if u make it right do away with this plus the guy should have omed him before he brought it to here..jmo..

jd...your a fuckin retard...its simple.......shoulda listened to the people telling you to just send cameron [redline] your cyls to be ported. and u wouldnt of had to deal with this. if u missed it the 1st time....once again. your an idiot. sell your bike and buy a shiny ball. that should keep u entertained, plus u dont have to deal with really hard stuff like changing spark plugs and mixing your gas

[ClimbAnyHill]

i seen these cylinders today...these things are all fucked up ! i was at the shop when shawn was telling me everything besides the obvious was wrong with them...

Get any pictures? I'd like to see how the makeover compares to this. Thanks.

[bad 350 shee]

it just pisses me off that i made this right and ass holes still runnin me down infact i let him keep the cyls and pods and good 20 over pistons and sent a set of pipes out today and sclincers if thats not good enough them im sorry

[So Cal Suspension]