AdrenalineJunky Posted August 25, 2010 Report Posted August 25, 2010 The large washer and bearing part goes on the inside of pressure plate correct? Mine has a small washer on the outside behind the nut. Quote
madjimmax Posted August 25, 2010 Report Posted August 25, 2010 I dont know what type you have, but I have a cascade and it has 2 big washers one on each side of the bearing. And yes all that goes inside. Mine dont have a small washer under the nut either. Quote
AdrenalineJunky Posted August 25, 2010 Author Report Posted August 25, 2010 Safe to say the small washer goes on the outside of the pressure plate. What do you guys do just leave the clutch cover off and then adjust everything once you hook up the clutch cable and such? Quote
AdrenalineJunky Posted August 25, 2010 Author Report Posted August 25, 2010 ALSO: Where is the arrow on the case that you are supposed to line up. I do not see one at all. Anyone got a pic of proper positioning of lever. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.