Ferocity02 Posted August 19, 2010 Report Share Posted August 19, 2010 I'm not sure what it's called exactly, but I need the sleeve that goes inside the swingarm pivot. Looks like this.... Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted August 19, 2010 Report Share Posted August 19, 2010 I do know that the "All Ballz" pivot bearing kit comes with the spacer sleeve,dust seals, and bearings. Might check with F.A.S.T. to see if it's available seperatly. Little tip ; coat pivot bolt with anti- seize so it will come out of sleeve at a later date. Quote Link to comment Share on other sites More sharing options...
alf44 Posted August 19, 2010 Report Share Posted August 19, 2010 The kit does come with the sleeve. I have one in stock. I think I may also have just a sleeve laying around. Pm me if you want either one. Quote Link to comment Share on other sites More sharing options...
Ferocity02 Posted August 19, 2010 Author Report Share Posted August 19, 2010 I only need the sleeve, no bearings or seals. This is for a +14 Raptor 660 swingarm with a solid pivot tube, thus I need a much longer sleeve. A used one from someone's old swingarm would be fine. I'll pay around $15 shipped for it. Shipping with USPS in an envelope would be a few bucks. Quote Link to comment Share on other sites More sharing options...
SandmanPNW Posted August 22, 2010 Report Share Posted August 22, 2010 I only need the sleeve, no bearings or seals. This is for a +14 Raptor 660 swingarm with a solid pivot tube, thus I need a much longer sleeve. A used one from someone's old swingarm would be fine. I'll pay around $15 shipped for it. Shipping with USPS in an envelope would be a few bucks. Ok, 15 bucks I'll send u one. PM if interested and I will take a pic and give u my paypal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.