banshee not spraking

[coon]

okay i just got into the banshee game and picked my first banshee well for the 2 days i have ridden it id never wanna switch to a different quad lol anyways here is how my no spark problem started....got the quad it ran real bad so i cleaned the carbs and did some researching turns out when i jumped the tors system the quad seemed to run normal idle fine but wouldnt start without carb cleaner...when i checked the spark i thought that it seemed a lil weak well i started the quad it ran good went to the store came back and it had no spark at all i looked at my keyswitch and noticed a lil spring popping out the side of the tumbler so i cut out the igniton and connected the red and black wire...nothing so i took the flywheel cover off and cleaned the surface rust on the flywheel mags and hit the pick up a little bit still nothing so tomarrow i will have my hand on a wire tester and im wondering how i go about testing the stator also i read you cant test the cdi box only way to find if there bad is swap them im wondering if u can get ohms threw the stator into the cdi but nothing out of the cdi would that be like testing it im not very good with wiring and such but i dont wanna give up ont his awesome machine i just bought it and for the good 3 hrs i rode it i fell in love...thanks for reading this and thank you for any help!!!

[xXBlessedWithDeathXx]

when you jumped the tors system?

[coon]

when you jumped the tors system?

well when i jumped the tors system the quad ran alot better but still wouldnt start without carb cleaner i started it shut it off kicked it over and it started one kick went to the store and when i got back there was no spark when i shut it off i used the key to shut it down got pissed off with it not starting came outside today noticed that a small spring was hanging outside the tumbler of the keyswitch so i hot wired the switch and still no sprak im not sure if it was just the luck of the draw and the stator went bad or cdi kind of stumped untill i get this wire tester i guess...im just looking for any input im all ears

[Larry's Shee]

I'm no Edison myself, but looking at the wire diagram both switches ( key & stop) only have two wires ,hot and ground, switch is "open" in the run posistion. By connecting red /black with black (ground) you have killed the power. try disconecting those wires.

[coon]

I'm no Edison myself, but looking at the wire diagram both switches ( key & stop) only have two wires ,hot and ground, switch is "open" in the run posistion. By connecting red /black with black (ground) you have killed the power. try disconecting those wires.

i will try that tomarrow and see what happens but if you take a look at the last diagram at this link http://bansheehq.com/forums/index.php?showtopic=133650 you will notice that the key switch is deleted and the red and black is together at the cdi box