brock42 Posted August 14, 2010 Report Posted August 14, 2010 alright guys i came across a 2006 special edition banshee with a set of bills pipe reeds and reed spacers boost bottle all that good stuff it was pretty much brand new and hadnt been rode hardly any i paid the guy 2000 for it rode it one time and held it wide oped for a little too long and gonna have to rebuild top and bottom end i do mostly trail riding and a few races here and there so what should i do the rebuild to any suggestions thanks for any advice Quote
toytech Posted August 14, 2010 Report Posted August 14, 2010 (edited) alright guys i came across a 2006 special edition banshee with a set of bills pipe reeds and reed spacers boost bottle all that good stuff it was pretty much brand new and hadnt been rode hardly any i paid the guy 2000 for it rode it one time and held it wide oped for a little too long and gonna have to rebuild top and bottom end i do mostly trail riding and a few races here and there so what should i do the rebuild to any suggestions thanks for any advice Welcome to BHQ put a hot rods trued and welded crank in it, then have a MX port job done and get it bored to the next over size. I recomend to have one of the site sponsors do it for you, they all have good reputations. Jeff at F.A.S.T racing 1 785 364 5325 can hook you up with everything you need and will steer you in the direction you want to go just tell him how you ride. Edited August 14, 2010 by toytech Quote
brock42 Posted August 14, 2010 Author Report Posted August 14, 2010 put a hot rods trued and welded crank in it, then have a MX port job done and get it bored to the next over size. I recomend to have one of the site sponsors do it for you, they all have good reputations. Jeff at F.A.S.T racing can hook you up with everything you need and will steer you in the direction you want to go just tell him how you ride. aight the guy i bought it from hes been working on atvs for a while and hes always messed with banshees i was gonna let him rebuild it just wondering what motor setup to go with how would i get one of the site spoinsors to do it do you send the motor off and whats the price range on rebuilding Quote
toytech Posted August 14, 2010 Report Posted August 14, 2010 aight the guy i bought it from hes been working on atvs for a while and hes always messed with banshees i was gonna let him rebuild it just wondering what motor setup to go with how would i get one of the site spoinsors to do it do you send the motor off and whats the price range on rebuilding you could have him put it together and just send the cylinders out for porting and boring, the crank should be about 500 the stock crank would cost about 350 to fix properly I went with new myself. the MX porting is aroud 350 and the boring is 100 and the only pistons I would get a wiseco they are about 160 to 170. I know it sounds like a lot of $ but well worth it for the power and reliability. I don't know what it would cost for Jeff to do the complete job call him and ask he is great to deal with!! I just got out my credit card and sent my cyls to him, and am still sleeping in the dog house but worth it, and my shee loves my for it. Quote
brock42 Posted August 14, 2010 Author Report Posted August 14, 2010 you could have him put it together and just send the cylinders out for porting and boring, the crank should be about 500 the stock crank would cost about 350 to fix properly I went with new myself. the MX porting is aroud 350 and the boring is 100 and the only pistons I would get a wiseco they are about 160 to 170. I know it sounds like a lot of $ but well worth it for the power and reliability. I don't know what it would cost for Jeff to do the complete job call him and ask he is great to deal with!! I just got out my credit card and sent my cyls to him, and am still sleeping in the dog house but worth it, and my shee loves my for it. alrighty ive heard alot of talk about the 4mil stroker would i gain some more power and torq with a 4mil Quote
toytech Posted August 14, 2010 Report Posted August 14, 2010 (edited) alrighty ive heard alot of talk about the 4mil stroker would i gain some more power and torq with a 4mil OH yea and the cost is about the same. whear you do you live at? Edited August 14, 2010 by toytech Quote
jtwelding Posted August 14, 2010 Report Posted August 14, 2010 alrighty ive heard alot of talk about the 4mil stroker would i gain some more power and torq with a 4mil Jeff quoted me 1,200 for a 4 mill set up, bore and port jugs, and thats tear down inspection, work and assembly with leak down check and jetting, That was with a dune port, and all the shift mods too. Quote
toytech Posted August 14, 2010 Report Posted August 14, 2010 Jeff quoted me 1,200 for a 4 mill set up, bore and port jugs, and thats tear down inspection, work and assembly with leak down check and jetting, That was with a dune port, and all the shift mods too. thats an awsome price!! and you proly can hand deliver it to him? Quote
brock42 Posted August 14, 2010 Author Report Posted August 14, 2010 thats an awsome price!! and you proly can hand deliver it to him? im from tuscaloosa alabama im new to all this stuff i just want a good reliable setup that will smoke a@@ when it comes down to it i know im gonna have to have the cylinders bored does this guy have some contact info i could call and talk to him about it and how fast are the 4mil compared to like a 450 and raptors Quote
madjimmax Posted August 14, 2010 Report Posted August 14, 2010 I'm one more fro Jeff @ FAST he's the man and he'll get you hooked up the right way. His work is very clean and precise. He's done porting for me on my current setup and I'm trying to locate some stock bore and port cylinders so he can get my 4mil setup going. Here's a link to his site FAST Racing and his phone number is 785-364-5325. Good luck with the rebuild and welcome to the one and only BHQ. Quote
brock42 Posted August 14, 2010 Author Report Posted August 14, 2010 I'm one more fro Jeff @ FAST he's the man and he'll get you hooked up the right way. His work is very clean and precise. He's done porting for me on my current setup and I'm trying to locate some stock bore and port cylinders so he can get my 4mil setup going. Here's a link to his site FAST Racing and his phone number is 785-364-5325. Good luck with the rebuild and welcome to the one and only BHQ. thanks for all the quick replies makes everything simple gonna call fast here in just a sec and talk about some settups thanks once again for all the help Quote
toytech Posted August 14, 2010 Report Posted August 14, 2010 im from tuscaloosa alabama im new to all this stuff i just want a good reliable setup that will smoke a@@ when it comes down to it i know im gonna have to have the cylinders bored does this guy have some contact info i could call and talk to him about it and how fast are the 4mil compared to like a 450 and raptors a ported 4mil will kil a raptor and a 450 Quote
brock42 Posted August 14, 2010 Author Report Posted August 14, 2010 a ported 4mil will kil a raptor and a 450 yeah thats what i had figured just got off the phone with jeff hes gonna call me back and we gonna see if we can get her fixed up thanks for all the help man Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.