Banshee unported cylinders

[toddyfresh]

I got a set of unported banshee cylinders off of my buddies 99.. He bought ported cylinders off of ebay so i am selling these ones for him.. I dont have a caliper to measure it but he said he believes they are 65.5.. I took a measure with a tape and came out with 2 19/32 which is roughly 65.7 or around that.. They cylinders are nice and clean but on one of they they have a few knicks all the way at the bottom of the sleeve.. Knicks are small and only go up roughly 1/2" high.. He had his bottom end done year ago and ran all this time fine so I dont believe it affects engine performance.. Looking for around 100 shipped.. I can email photos if interested it says file is too large

[eric b]

I got a set of unported banshee cylinders off of my buddies 99.. He bought ported cylinders off of ebay so i am selling these ones for him.. I dont have a caliper to measure it but he said he believes they are 65.5.. I took a measure with a tape and came out with 2 19/32 which is roughly 65.7 or around that.. They cylinders are nice and clean but on one of they they have a few knicks all the way at the bottom of the sleeve.. Knicks are small and only go up roughly 1/2" high.. He had his bottom end done year ago and ran all this time fine so I dont believe it affects engine performance.. Looking for around 100 shipped.. I can email photos if interested it says file is too large

 

send pics to [email protected]

 

Thanks