Need unported cylinders and a stock crank

[lazzonya]

Parts needed to rebuild a blown project bike. I would prefer cylinders 65mm and under and the crank must have no bearing play. Would also take good condition used pistons to match the cylinders.

 

Could use a decent kickstart lever too.

 

Let me know what you have shipped to 18201.

 

Thanks in advance!

 

-Bob

 

[email protected]

Edited June 7, 2010 by lazzonya

[alf44]

Ive got some cylinders and pistons. I believe its bored once. Ill measure it. I was going to PC them chrome. What are you looking to spend? Shoot me a pm or give me a call tomorrow. Ill be in the shop 9-530 I can get you a great deal on a new stock crank and kicker also.

[_Hex*]

Parts needed to rebuild a blown project bike. I would prefer cylinders 65mm and under and the crank must have no bearing play. Would also take good condition used pistons to match the cylinders.

 

Could use a decent kickstart lever too.

 

Let me know what you have shipped to 18201.

 

Thanks in advance!

 

-Bob

 

[email protected]

 

hey i have some decently ported fresh bored cylinders and crank i can make you a deal on if your interested i can get you new pistons and gaskets and pretty much anything you need let me know