slktrik Posted May 29, 2010 Report Posted May 29, 2010 New to HQ, Glad to find this site! Does anyone know where I can find tech info on replacing domes on a prodesign coolhead (bolt torque and sequence) never done it before. Thanks for any response. Quote
fastbanshee8 Posted May 29, 2010 Report Posted May 29, 2010 Torque, and sequence is the same as the stock head. If you don't have a Clymer's manual, buy one, because you're going to need it many times. Quote
slktrik Posted May 29, 2010 Author Report Posted May 29, 2010 Torque, and sequence is the same as the stock head. If you don't have a Clymer's manual, buy one, because you're going to need it many times. Thanks for the info. I do have it have used it alot and will use it alot more I am sure. Quote
vbanshee Posted June 1, 2010 Report Posted June 1, 2010 two sequences first 18 ft lbs... then 20 ft lbs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.