pweezy42 Posted May 14, 2010 Report Posted May 14, 2010 ok so i got some stuff in the mail today and started to put it on the bike. so i took off the airbox lid and old filter, put on the modquad adapter and k&n filter w/the outerwwear no lid, i didnt rejet up from the 270's yet since somone told me to run it first. i ran the bike couldnt quite get it to 6th WOT(not enough room) but 5th i did. pulled the plugs they looked like milk chocolate. my problem is it felt like it was holding back? could this have been the outer wear? should i still rejet up? any helpful tips thanks guys Quote
firebanshee Posted May 14, 2010 Report Posted May 14, 2010 ok so i got some stuff in the mail today and started to put it on the bike. so i took off the airbox lid and old filter, put on the modquad adapter and k&n filter w/the outerwwear no lid, i didnt rejet up from the 270's yet since somone told me to run it first. i ran the bike couldnt quite get it to 6th WOT(not enough room) but 5th i did. pulled the plugs they looked like milk chocolate. my problem is it felt like it was holding back? could this have been the outer wear? should i still rejet up? any helpful tips thanks guys You need to rejet, i would put a 300s in it. Always jet up then drop down if needed,you will lean your motor out. Quote
pweezy42 Posted May 14, 2010 Author Report Posted May 14, 2010 alright ill rejet 2mrw i have a set of 290's here ill try. i thought the outerwear was holdin it back Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.