Gearing for sand drags

[Loc]

I am looking to get the right gearing for my setup and don't know alot about gearing. I have a Dune/Play port, pipes, filters, advanced timing and the basic bolt on modifications. I am currently running 21x10x8 8 paddle haulers on the rear. I do mostly drag racing and some trail/dune riding. I am looking for gearing that is going to give me the optimum performance in a 300' or slightly longer sand drag race. My gearing is currently stock. Thanks for the help.

[Loc]

Nobody has a good idea for gearing for sand drags.

[87sheerips]

I run 15/44 in my 4mil stock cylinder drag bike. 12 paddle extremes with a 10 over arm. it works well for me. I like it.

[springer]

i am running a 13 tooth in front with a very similar setup to yours. it works good, but i had that on from when i was running stock jugs. i think i am going back to the 14 up front which is stock gearing. you might already be where you need to be. if anything, buy a couple different fronts and play around. they are cheap enough...

[badassbanshee479]

try a 15/42..... might need a 43 should wok good for ya