NOSS head hitting cpi pipes

[sled]

like the tittle says, are you guys using different pipe mounts? My pipes are hitting the head when I start to rev my bike.

 

thanks Bill

[bansheesandrider]

Mount the pipe on the outside of the hanger and/or put some washers between the pipe and hanger or the hanger and the frame.

[sled]

Mount the pipe on the outside of the hanger and/or put some washers between the pipe and hanger or the hanger and the frame.

I already did that. now it looks like the rubber is tearing and theirs a crack in the right side pipe mount too.

[Ieat4strokes]

drill 2 holes through the mount and rubber....run 2 (i prefer stainless) Allenheads through the mount to keep it from tearing all the way. My T5's I had did the same thing, just shimmed pipe mount out from frame with washers

[sled]

drill 2 holes through the mount and rubber....run 2 (i prefer stainless) Allenheads through the mount to keep it from tearing all the way. My T5's I had did the same thing, just shimmed pipe mount out from frame with washers

Didn't think of that thanks!