bobdryerr Posted April 9, 2010 Report Share Posted April 9, 2010 Ok so i havent been on much latey an decided to start working on the shee again. so far ive put a brand new top end rebuild on her an then i also went from the 2 to 1 carb setup also all brand new. an for some reason now when i start her she only fires right on the left cylinder. i put new plugs an switched the reeds around an even the plug wires to see if i had them backwords an nothing helped. could it be an air leak or maybe a timing issue. i also discovered that there is a solid white wire that comes out of the stator that is cut an tapped off an goes no where. ive check in my book an it shows there shouldnt be a white wire anywhere. im so confused on what to do next. by the way its an 89 shee if that will make any difference.. thanks gays/gals Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.