Questions on carbs I just got

[Husemoller]

Hey guys, Just got in couple used carbs that have tors removed on it. Took them apart and cleaned them a little bit. But got a couple questions.

 

First what does this screw do on the left? I took it out and cleaned everything up but curious on how I should know how far to screw it in.

 

and then this would be the air/fuel mixture screw right? which I would turn all the way in and then turn out about 1 1/2 turns and just go from there? my machine is stock besides a k and n air filter

 

Thanks guys

[wacko2000]

In the first picture, thats your air/fuel screw

The second picture is your idle adjustment.

Check out the jetting forum, they are a couple good threads that will help you out with jetting and tuning your carbs

 

http://bansheehq.com/forums/index.php?showforum=4

At the top, there are a few you should read through.

[Husemoller]

alright cool thanks man

 

also the float area cover that comes off with 4 screws. Is the one with the little jet in there the one for the carb with the choke??? I am positive i didnt mix them up but for some reason the one with the jet was on the carb without the choke. Just want to make sure I got them right.

[Husemoller]

nevermind just found a thread with exactly what i was looking for