Need advice on paddle/ swingarm choice

[SLORYDER]

Ok it's gonna be on a fully drag ported 350 w/ 34mm carbs/ cpi pipes j arm frame with 160 lb rider.

 

Also gonna be that heavy sand with the little bitty pebbles in it

(LA Dunes)

 

Thanks

[SLORYDER]

Also not sure the gearing but the guy says it is geared to run right at 100mph in 6th and I believe the front sprocket is a 15 or a 16

[RadarRacing]

Need more info. On alky or out of frames will pull more tire and need more arm. On gas and inframes to play and dune a +6 and 9 or 10 paddles.

[SLORYDER]

Need more info. On alky or out of frames will pull more tire and need more arm. On gas and inframes to play and dune a +6 and 9 or 10 paddles.

 

Inframe pipes.

Pump gas

I have a +8 and some 11 paddle tripple buffs right now but I run tubes in 'em and don't know if I can get the pressure low enough top bite outa the hole..

[RadarRacing]

Probably a +6 then and a 10 paddle extreme since the jocky is light. That's what my buds and I ran for years and had fun dune racing. If you use an 8 over you'll wanna run 11s probably.

[randomrider]

i wouldnt get your hopes up on it running 100 mph

[SLORYDER]

I'm sure with the mods listed I could easily run 100 mph on asphault

 

I was just giving you a rough estimate of my gearing.

 

Seems like a +8 would be short for dragging I could be wrong though....