oil leaking from the shifter

[g_low0885]

i went out to the grarge and found a oil puddle under the shee. it looks like it is comeing from the shifter. how hard is it to change the seal on the shifter?

[Profilact]

Its not hard

[SAVAGE420]

I just use 2 small screws across from one an other, screw them in a then pull on them with some vise grips and she will come out. Then lightly grease the seal and push the seal in easy with a socket of the same size as the seal. Done!

[g_low0885]

thanks for your help. it sounds easy enough.

[superfastyfz450driver]

you will need one hell of a long socket since the banshee shift shaft sticks out at least 2 and a half inches long you might be better off trying to use a couple old wrist pins if you have some laying around

[Bansh-eman]

you will need one hell of a long socket since the banshee shift shaft sticks out at least 2 and a half inches long you might be better off trying to use a couple old wrist pins if you have some laying around

What are you talking about? You can slide the whole shaft out the side of the case and there is nothing in the way.

[DallasGDub]

What are you talking about? You can slide the whole shaft out the side of the case and there is nothing in the way.

I think he means leaving the clutch cover on, and not taking out the shaft at all.

[Driggs]

I was able to press mine on with my thumbs.