hyperpro Posted February 2, 2010 Report Posted February 2, 2010 What should a stock Banshee engine have for compression? Quote
00sheerzr Posted February 2, 2010 Report Posted February 2, 2010 What should a stock Banshee engine have for compression? anywhere between 115-120 maybe 125 anything under 110 psi in kinda low Quote
Howsahemi Posted March 5, 2010 Report Posted March 5, 2010 How many kicks should you do to check compression? Quote
peterlocal22 Posted March 5, 2010 Report Posted March 5, 2010 its been a while but i think you just kick it until the reading stops or dramatically slows down Quote
TwistedSheeRida Posted March 5, 2010 Report Posted March 5, 2010 my buddies is at about 130 135 Quote
Howsahemi Posted March 5, 2010 Report Posted March 5, 2010 I just bought my first four wheeler ever. And it's a 2000 banshee. All stock. With three kicks I have 100. 5 or 6 kicks it tops out at 130 both sides are even either way. Quote
BigMatt Posted March 5, 2010 Report Posted March 5, 2010 I just bought my first four wheeler ever. And it's a 2000 banshee. All stock. With three kicks I have 100. 5 or 6 kicks it tops out at 130 both sides are even either way. your pretty freash!!!! you dont need to re-build Quote
over860 Posted March 6, 2010 Report Posted March 6, 2010 Hello this is James from NJ I'm listen about this site from my friend so today This is my first post here Quote
flyhighprerunner Posted March 6, 2010 Report Posted March 6, 2010 Make sure that you kick it with the throttle wide open also. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.