blackedout96 Posted January 22, 2010 Report Posted January 22, 2010 Just as the title says, I really need a set of 34mm alky carbs, thinking pj's cause they're usually cheap. Building this Banshee on an extremely tight budget so be gentle. Let me know what ya got! Thanks! Quote
blackedout96 Posted January 23, 2010 Author Report Posted January 23, 2010 What motor were they set up for? If it was a stroker they might be set too rich for my motor. If they'll work on a dune port stock stroke, ill take them. Would like to see pic first. You can email them to [email protected] Quote
blackedout96 Posted January 23, 2010 Author Report Posted January 23, 2010 Ya, the problem is that the dumps would also have been drilled out and those can't be backed down Quote
sheefreak Posted January 23, 2010 Report Posted January 23, 2010 Most likely they would be pretty close. If Teddy had to run the power jet open at all you should be able to close them down enough for your App. Beside, you can still put a smaller jet in them. I run a .120 jet and my dumps are drilled to .124. Quote
squezen Posted February 2, 2010 Report Posted February 2, 2010 Just as the title says, I really need a set of 34mm alky carbs, thinking pj's cause they're usually cheap. Building this Banshee on an extremely tight budget so be gentle. Let me know what ya got! Thanks! Got a new pair of FTZ 35.5 Mikuni, with large billet bowls http://i282.photobucket.com/albums/kk276/squezen/012.jpg http://i282.photobucket.com/albums/kk276/squezen/011.jpg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.