medamorfis Posted December 2, 2009 Report Share Posted December 2, 2009 what type of doems do I need if my banshee has a hotrod crank and I have 66.0 Quote Link to comment Share on other sites More sharing options...
grandnational Posted December 2, 2009 Report Share Posted December 2, 2009 what type of doems do I need if my banshee has a hotrod crank and I have 66.0 what size stroke.. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted December 3, 2009 Report Share Posted December 3, 2009 At 66mm bore your in the grey area. Your at the end for standard bore domes. I would run 66-68mm big bore domes, that way you will have less sealing problems. Big bore domes move the o ring out slighly, and dont have a full machined gove. The out side lip isnt there so it is like a half of a grove and the shell makes up the other part of the groove. As for cc's that depends on what elevation you ride at, if the engine is ported, and what octane of fuel you want to run. josh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.