BigRed350x Posted December 1, 2009 Report Posted December 1, 2009 (edited) This is a custom made hillshooter / drag banshee. Many of the parts on the bike were custom machined by Firehead and cannot be bought from any other builder or outlet. Including the Twister Big Block Cylinders machined for both a 10mil Stroke and 137mm Rods. It sits on a complete chromoly, NON-hybrid frame built by HS Customs and K&T. The whole bike is around 230lbs and can be picked up very easily to chest height by two people. My dad is on oxygen and has COPD. He cannot ride quads any more. I would like to sell my drag bike so I can get an RZR for my mom and dad to ride in, so they can continue to come to the dunes and enjoy this sport together. I would trade for an RZR, or if you have an RZR-S or something of more value, I have a few other quads I can throw in on the trade to make things fair. I have a YFZ with a hard running 480 engine, and a Raptor with an R6 engine w/ elka shocks, custom plastics, +3+1 a-arms etc. Here's the drag bike... Chassis JJ&A Smooth Buff Front Tires JJ&A 3-Spoke Front Hubs/Wheels JJ&A Gun-Drilled Aluminum Drag Axle (Banshee Hubs & Sprocket Hub) HS Customs Chromoly Hillshooter Frame (NOT a hybrid frame) Custom Made Billet Aluminum Brake Lever Sawblade Brake Rotor Chrome Footpegs 1.5gal Aluminum Drag Tank Pingel Valve +10 Crushed Oval Chrome Swingarm Stock Width +2 forward Chrome A-Arms Marvin Shaw Hillshooter Series fronts, Custom Machined Billet Tie Rods Machined to match front Marvins Marvin Shaw Comp Series rear Twister Fiberglass Front Fender 22x12x10 12-Paddle SLS Haulers on Douglass Rims Chrome Steering Stem Renthal Bars All the fancy little polished covers Braided Stainless Steel rear brake line Mattoon Billet Brake Resevoir Engine Twister Big Block Cylinders Custom Machined for 10mil Stroke 78mm Bore Vforce 3 Reeds Skidoo Powervalves Big Flange Exhaust Shearer Hand-Coned Chrome Exhaust made specifically for this engine Both out Right Side 10mil Big Pin Billet Crank w/ 136mm Rods (Made by Twister) 2-5 WCR Override Billet 2nd Gear Straight Cut Gears Billet Basket Direct Drive Lockup & Cover Chrome Kicker 41mm Mikuni TMX Carbs w/ Dave Moore SuperJets & Billet Bowls (Alky) K&N Filters Stock Stator Adjustable Timing Plate Dyna FS Programmable Ignition High Output Coil w/ grounding straps Billet Stator Cover Chain Guard Lots of other little stuff... Registered in Wyoming, Colorado and Oregon until end of 2010. Have Wyoming Title in-hand. Purged every time its been run. Garage Kept and hand-cleaned after every trip. $9000 Email me for more information or if you have an RZR you would like to work a trade on. [email protected] Edited December 1, 2009 by BigRed350x Quote
papa_smurf49319 Posted December 1, 2009 Report Posted December 1, 2009 Damn whys everybody selling there shees? Nice bike thats for sure, and heres a bumb for a guy whos been here for along time! Quote
camatv Posted December 1, 2009 Report Posted December 1, 2009 i love how it seems noone can read on this site.. or even craigslist. sorry to hear about your dad hope you can find what you need.. Quote
BigRed350x Posted December 1, 2009 Author Report Posted December 1, 2009 i love how it seems noone can read on this site.. or even craigslist. sorry to hear about your dad hope you can find what you need.. Thanks Quote
papa_smurf49319 Posted December 1, 2009 Report Posted December 1, 2009 (edited) i love how it seems noone can read on this site.. or even craigslist. sorry to hear about your dad hope you can find what you need.. I take it this was directed to me, i did read it and did understand why he is selling his!!!! But i was just saying it seems like alot of the oldtimers are sellin there shees lately, so quit bustin everybodys balls so quick! Edited December 1, 2009 by papa_smurf49319 Quote
BigRed350x Posted December 2, 2009 Author Report Posted December 2, 2009 Bump! Get a complete bike, custom built, ready to shoot the hill or run down the track... for almost the same as others are selling just their engine for. http://s260.photobucket.com/albums/ii14/WyoBanshee/?action=view¤t=MOV00139.flv Quote
278 Posted December 2, 2009 Report Posted December 2, 2009 Sorry to here about it man. Hopefully everything works out for ya' BUMP for a great guy and and awsome deal Quote
BigRed350x Posted December 2, 2009 Author Report Posted December 2, 2009 Sorry to here about it man. Hopefully everything works out for ya' BUMP for a great guy and and awsome deal Thanks! Bump! I'll trade the 612cc Big Block Twister drag bike AND my R6 raptor for an RZR. Quote
papa_smurf49319 Posted December 4, 2009 Report Posted December 4, 2009 I dont know what it is about this bike but it fricken rocks, i love the plain white and blue. Wish i had the coin! Quote
BigRed350x Posted December 5, 2009 Author Report Posted December 5, 2009 Bump! Thanks smurf! Come on folks, can't build a bike like this for this price. Quote
BigRed350x Posted December 8, 2009 Author Report Posted December 8, 2009 sdfksf,xnvsdfsdfuwe,sfnxovxufsdfkljwe.,frmnwesovsdfks Bump Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.