duncanshee Posted October 18, 2009 Report Share Posted October 18, 2009 anyone know where to buy different style and length needles? , i know my stock needle is a 5n7, is this shorter than say a needle from dyno or moose jet kit? basically the needle from my spare carbs are on the lean side and alot longer than the needle out of my primary set. dont know where they came from . even if i were to put the clip on the very bottom of the needle it is still longer than the other needles i have. Quote Link to comment Share on other sites More sharing options...
Sammy Posted October 19, 2009 Report Share Posted October 19, 2009 Im pretty sure Vitos has the "red" needle for stock carbs, and trinity has needles for the stock carbs they are both supposed to be decent parts. Quote Link to comment Share on other sites More sharing options...
duncanshee Posted October 19, 2009 Author Report Share Posted October 19, 2009 Im pretty sure Vitos has the "red" needle for stock carbs, and trinity has needles for the stock carbs they are both supposed to be decent parts. thanks , i'll check them out. Quote Link to comment Share on other sites More sharing options...
Nath Posted October 19, 2009 Report Share Posted October 19, 2009 I'm in the same boat.. I need to replace the Needle Jets and Jet Needles on my VM26SS carbs Is it possible to match the standard numbered generally available Mikuni ones (from places like Sudco) to the OEM ones ? I think the Needle jets are 183 series ? so would the 183 Series O-8 be the go ? I guess a close match on the #5 series needles would be ok ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.