zach45 Posted October 15, 2009 Report Posted October 15, 2009 im trying to slide the pin in, that holds the piston to the rods and on one of my new 795 pistons the pin wont go threw... any ideas? Quote
skinindustries Posted October 15, 2009 Report Posted October 15, 2009 are they cir clips in? sound stupid but might wanna check that out first. Quote
SAVAGE420 Posted October 15, 2009 Report Posted October 15, 2009 Lube it up well with the oil you use. Are both sides of both pistons going you fuss? Quote
zach45 Posted October 15, 2009 Author Report Posted October 15, 2009 both sides are a cunt.... almost like the pin is too big for it ... can i heat the pin up? Quote
SAVAGE420 Posted October 15, 2009 Report Posted October 15, 2009 both sides are a cunt.... almost like the pin is too big for it ... can i heat the pin up? HAHA no, go the other way though, stick them in the freezer for over night and then lube them up and the hole and they should pop right in. Mine whet it pretty snug too, but they went in. Quote
B.Mag Posted October 15, 2009 Report Posted October 15, 2009 This prob insnt the case with yours, but when I was putting new pistons in mine one of the pistons had a tiny burr where the pin slides through and I couldnt get the pin in, so check for that and file it down if there is one. Just a thought Quote
zach45 Posted October 15, 2009 Author Report Posted October 15, 2009 no its nice and new... im freezing the rod now.. Quote
SAVAGE420 Posted October 15, 2009 Report Posted October 15, 2009 im freezing the rod now.. Why and how are you freezing the rod? Just stick both wrist pins in the freezer man Quote
zach45 Posted October 15, 2009 Author Report Posted October 15, 2009 the freezer? and the rod wont even slid into the piston... but im being told it will only side in one way... Quote
SAVAGE420 Posted October 15, 2009 Report Posted October 15, 2009 the freezer? and the rod wont even slid into the piston... but im being told it will only side in one way... Yes man, the wrist pins in the freezer for a good while, like 2 hours or so. And they will go in both ways from both sides. I had to do this on my sled years ago, shit worked. Quote
zach45 Posted October 16, 2009 Author Report Posted October 16, 2009 got it... should fire saturday... Quote
SAVAGE420 Posted October 16, 2009 Report Posted October 16, 2009 got it... should fire saturday... What did you do? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.