JMADD Posted September 26, 2009 Report Posted September 26, 2009 I've got 2 motors with the complete hinson 8-plate system. Billet spring-loaded basket, inner and outer hub, etc. I can't stage them at the starting line because both want to pull even with the clutch all the way in. I have plenty of lever pull, and the actuator is adjusted correctly. I even overtightened the cable just to see if it still pulled; which of course it still did . What are people doing to remedy this? I'm in the process of trying to locate some stock springs, but this is BS. My stock clutch setups never pull like this, even with the HD springs and double nut lockup. I'm running ATF type F, btw. Please PM if you have an answer, so Ill see it on my phone. Thanks Quote
JMADD Posted September 29, 2009 Author Report Posted September 29, 2009 Ok I fixed them both. Installed 6 raptor 660 clutch fibers and 2 banshee clutch fibers. Immediately fixed the problem on the Cheetah. THe Twister had problems with cables and levers, but finally got it lined out also. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.