fastrthnu Posted September 20, 2009 Report Share Posted September 20, 2009 Engine is 391cc, made 160 psi before pulled apart, makes 180+ at sea level fresh. Pistons are good, needs hone n rings. Does NOT need rebore. Head milled and stroke clearanced, 4mm hotrods crank, rz powervalve cyls 12 port 65.5mm, vortex billet clutch basket, f.a.s.t. plates, std gearing, has no flywheel or reeds. 200w stator, full rz conversion harness, cdi, servo controller, servo motor, ect. exhaust flanges, everything other than pipes and carbs for this conversion. Very good hard pulling all around motor. If I can find them, I have some 34mm flatslide carbs too. Sell your std motor for $800, and get this nicer one for $1100 total inc ship n paypal fees. I will part it upon payment for 600 + shp for cyls, pistons, head, harness, n stator 275 + shp for crank 150 + shp for cases 100 + shp for clutch 75+ shp for full tranny 20+ shp forks n drums other misc, ask. Quote Link to comment Share on other sites More sharing options...
fastrthnu Posted September 23, 2009 Author Report Share Posted September 23, 2009 fk it then, I put it all on ebay. Quote Link to comment Share on other sites More sharing options...
RippinShee Posted September 23, 2009 Report Share Posted September 23, 2009 Whats the link for the ebay auction? Quote Link to comment Share on other sites More sharing options...
JMADD Posted September 24, 2009 Report Share Posted September 24, 2009 I need the crank. Quote Link to comment Share on other sites More sharing options...
Whitbread Posted September 25, 2009 Report Share Posted September 25, 2009 I'd kill for that motor combo. If only I had $600 laying around . Quote Link to comment Share on other sites More sharing options...
fastrthnu Posted September 29, 2009 Author Report Share Posted September 29, 2009 the bottom end sold, the top end has 1 day left,.... http://cgi.ebay.com/ebaymotors/Ported-banshee-rz-4mm-cylinders-passion-racing-12-port_W0QQitemZ290351861312QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item439a51ce40&_trksid=p4506.c0.m245 Quote Link to comment Share on other sites More sharing options...
AKheathen Posted September 29, 2009 Report Share Posted September 29, 2009 well damn, i should scrolled all the way down the post. nice price on that crank....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.