robert0762 Posted September 5, 2009 Report Posted September 5, 2009 I think my clutch is slipping. When I get on the pipe it seems like the motor takes off and the wheels are left behind. From a stand still it grabs good, but does have a very small engagement . Wich I think is normal...correct????????? I use 10w40 oil in it and just had it off recently due to new seals. Tha fibers looked ok they still had pucks on them. But I dont know what a clutch looks like out of the box so I could be wrong. Motor is stock just a couple of bolt ons so does it sound like i need a new clutch or is it a dif. problem Quote
robert0762 Posted September 5, 2009 Author Report Posted September 5, 2009 come on guys I need some help Quote
00tbanshee Posted September 6, 2009 Report Posted September 6, 2009 -check and make sure the 2 arrows on the top of your case are lined up.there is one on the case and one on the clutch rod that goes down through the top of the case -make sure you have alittle free play in your clutch lever before it pulls the cable -make sure you are not leaking antifreeze into the tranny fluid if all is good, then sounds like you need a clutch.the fibers might look good but was the metal plates blued any? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.