garrett03 Posted September 4, 2009 Report Posted September 4, 2009 i have an 03 banshee,fmf fatty exuast,uni fiter,with stock carbs.im runnin a dyno jet kit with 340 mains and 30 pilots.i have stock needle,should i put the dyno jet needle.im at 16ft above sea level at 95* Quote
shawn941 Posted September 5, 2009 Report Posted September 5, 2009 i have an 03 banshee,fmf fatty exuast,uni fiter,with stock carbs.im runnin a dyno jet kit with 340 mains and 30 pilots.i have stock needle,should i put the dyno jet needle.im at 16ft above sea level at 95* Quote
shawn941 Posted September 5, 2009 Report Posted September 5, 2009 i have an 03 banshee,fmf fatty exuast,uni fiter,with stock carbs.im runnin a dyno jet kit with 340 mains and 30 pilots.i have stock needle,should i put the dyno jet needle.im at 16ft above sea level at 95* Quote
shawn941 Posted September 5, 2009 Report Posted September 5, 2009 i have an 03 banshee,fmf fatty exuast,uni fiter,with stock carbs.im runnin a dyno jet kit with 340 mains and 30 pilots.i have stock needle,should i put the dyno jet needle.im at 16ft above sea level at 95* ok,,,i'll try to post this again since the first time didnt take,,,lol. your running 340 mains and a 30 pilot with just fmf's? first of all,,,you need to go to 320 with a 27.5 pilot and see how it runs,,,may need to do down on the main but that is a starting point,,,how is it running now? like shit im assuming...... Quote
garrett03 Posted September 5, 2009 Author Report Posted September 5, 2009 the bike runs fine.i was just wondering about the needles Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.