dco3100 Posted September 4, 2009 Report Posted September 4, 2009 Never done it before, looking to get some input on how to Quote
bbcmudtruck Posted September 4, 2009 Report Posted September 4, 2009 Take a piece of solder and bend it into an L shape. Stick it down into your spark plug hole and align the L shape with the wrist pin. Next turn your motor over and smash the solder. Measure the thickness of the smashed part, thats your squish! Quote
dco3100 Posted September 6, 2009 Author Report Posted September 6, 2009 Where can I get a piece of solder, im guessin lk at an autozone, oreilly, etc. And when you say line it up with the wrist pin you mean put it in there horizontally as the wristpin does Quote
swrbansheeboy Posted September 11, 2009 Report Posted September 11, 2009 you should be able to buy solder from any auto parts store or radio shack, and yes you should put it inside the spark plug hole horizontaly or right to left centered on the piston crown(sitting on the bike) as opposed to front to back... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.