glassjawjm Posted August 19, 2009 Report Share Posted August 19, 2009 I have a 88 I am parting out, pretty much all stock some aftermarket stuff, let me know if you need anything. pro design +4 billet timing plate $40 2 sets of stock carbs with tors elim kit, comes with cable and handfulls of jets $80 a set Jugs in good shape, 65.5 bore comes with pistons right side needs rings $175 not ported 2 stock heads $50 a peice Hot rods stock stroke crank, stock length rods, with good bearing $200 Stock flywheel great shape, $50 case, has been bitten, $100 tranny great shape, .....make offer engine is not apart yet, except for head and jugs, will sell the complete engine for $600 with side covers, 115psi in left 95 in right. front plastics in good shape, rear has been zipped tied but not to bad, make offer. j-arm frame with papers.........? if its worth anything to you make offer Dura-blue stock width axle with locking posinut, brake hub and sprocket hub, $150 pretty much everything else is there and is stock, make me an offer at work right now, will get pics on here tonight. willing to trade for things like +2, +4 roundhouse swinger with carrier, a-arm frame, extended a-arm set, lock-ups, other goodies Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 19, 2009 Author Report Share Posted August 19, 2009 Rear grab bar and steering stem sold also have a full chassis skid $45 and a rear skid plate $10 and a set of t-5s in alright condition, silencers have no mount tabs. $275 Quote Link to comment Share on other sites More sharing options...
mongo Posted August 19, 2009 Report Share Posted August 19, 2009 what do you want for the wire harness Quote Link to comment Share on other sites More sharing options...
bassmaster345 Posted August 20, 2009 Report Share Posted August 20, 2009 how much for stator and flywheel shipped to 67217? Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 21, 2009 Author Report Share Posted August 21, 2009 how much for stator and flywheel shipped to 67217? Pm sent Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 21, 2009 Author Report Share Posted August 21, 2009 what do you want for the wire harness $55 shipped Quote Link to comment Share on other sites More sharing options...
someone82 Posted August 26, 2009 Report Share Posted August 26, 2009 (edited) Do you have any pictures of case and crank? If so e-mail them to someone82@aol.com. How much would shipping be to 93001? Thanks, Matt Oh BTW I have a '96 A-arm frame with no title... Edited August 26, 2009 by someone82 Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 29, 2009 Author Report Share Posted August 29, 2009 1 set of Carbs sold jarm pivot tubes and hardware sold tierods sold secondary coil sold voltage reg sold rear chain slider sold complete engine is pending Also have a proflow filter with mounting block $30 msd high energy coil $45 marshall fat bars(same as protapers yz bend) $25 pro-armor killswitch w/out the tether $15 everything else is still aval, I need this stuff out of my garage, make an offer. Got to get rid of it if you need pics I can snap them quick and email, it's just kinda hard to post everything off of an iPhone. Quote Link to comment Share on other sites More sharing options...
bamaboybv Posted August 29, 2009 Report Share Posted August 29, 2009 Frame and msd coil??? to Alabama 35160 Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 30, 2009 Author Report Share Posted August 30, 2009 Frame and msd coil??? to Alabama 35160 The shipping on the frame is going to be quite a bit, I think you would save a little money finding one locally, frame and coil shipped would be $330 Quote Link to comment Share on other sites More sharing options...
j2dakizzle Posted August 30, 2009 Report Share Posted August 30, 2009 do you have good tires on this bike? Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 30, 2009 Author Report Share Posted August 30, 2009 There alright, got a set of paddles that have decent tread left, a set of fairly new bandits with Douglas rims but I think I'm going to keep them for a while, the fronts are rats Quote Link to comment Share on other sites More sharing options...
Sandfrk33 Posted August 30, 2009 Report Share Posted August 30, 2009 Looking for a stock carrier with chain adjusters and bolts. Let me know. Quote Link to comment Share on other sites More sharing options...
glassjawjm Posted August 30, 2009 Author Report Share Posted August 30, 2009 Looking for a stock carrier with chain adjusters and bolts. Let me know. yup $45 plus shipping Quote Link to comment Share on other sites More sharing options...
Sandfrk33 Posted August 30, 2009 Report Share Posted August 30, 2009 yup $45 plus shipping Can you e-mail pics? basanchez75@verizon.net Do you use paypal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.