cpetersen Posted August 19, 2009 Report Posted August 19, 2009 Well I took my banshee thru some mud and now she wont run. Air filters are K&N and they were muddy. She has good spark and plenty of gas. Could my exhaust be the problem? Quote
shawn941 Posted August 19, 2009 Report Posted August 19, 2009 Well I took my banshee thru some mud and now she wont run. Air filters are K&N and they were muddy. She has good spark and plenty of gas. Could my exhaust be the problem? you may want to pull the carbs and give them a good cleaning,,,if there was mud all over the filters you more than likely got some dirt and or water in them Quote
cpetersen Posted August 19, 2009 Author Report Posted August 19, 2009 you may want to pull the carbs and give them a good cleaning,,,if there was mud all over the filters you more than likely got some dirt and or water in them I checked them and they are dirty. I also checked the compression and I only have 70psi per cylinder. I gues I cooked it. Quote
Stack Posted August 19, 2009 Report Posted August 19, 2009 Sounds like you cooked her... tear off the jugs and take a look! Quote
cpetersen Posted August 20, 2009 Author Report Posted August 20, 2009 Sounds like you cooked her... tear off the jugs and take a look! Thanks Quote
BSHEE400 Posted August 20, 2009 Report Posted August 20, 2009 (edited) did you warm up the engine before and hold the throttle wide open while you were kicking it over? are the threads on your comp gauge the same length as those on the plugs? IMO 70 psi sounds very low to have in BOTH cylinders, maybe you just "cooked" it :shrug: Edited August 20, 2009 by BSHEE400 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.