davidonmars Posted August 6, 2009 Report Posted August 6, 2009 Stock banshee I just got these LRD pipes and need to know where to jet them at. All my bike has is a K&N filter, airbox lid on and a boost bottle. Its a full LRD system with pipes and silencers. I ride at around 500ft above seal level. Right now my bike has 200 mains and i forget the pilots but there stock size as well. Quote
black sunshine Posted August 6, 2009 Report Posted August 6, 2009 If I were you I'd start with around 320's and do a plug chop. Probably fat, but that's good to start with, and if you do some more mods in the future you'll probably find them useful. Quote
davidonmars Posted August 6, 2009 Author Report Posted August 6, 2009 If I were you I'd start with around 320's and do a plug chop. Probably fat, but that's good to start with, and if you do some more mods in the future you'll probably find them useful. what about my pilot or needle Quote
jjn56 Posted August 6, 2009 Report Posted August 6, 2009 I have LRD pipes and I use a 300 mains and UNI filter no box lid, The pilot should be fine. Quote
davidonmars Posted August 7, 2009 Author Report Posted August 7, 2009 I have LRD pipes and I use a 300 mains and UNI filter no box lid, The pilot should be fine. should i move the needle clip? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.