Stock radiator with 4mm cub

[ryansedy]

I have a stock radiator, and a 4mm cheetah cub, with a high flow billet water impeller. Should i be able to run it in the sand without overheating on a hot day? Dont want to screw my bike up. Im also running Engine Ice coolant.

[VegasJeff]

I have a stock radiator, and a 4mm cheetah cub, with a high flow billet water impeller. Should i be able to run it in the sand without overheating on a hot day? Dont want to screw my bike up. Im also running Engine Ice coolant.

I run the same stuff you do with a cub and all is good. we just dont make it a habit to let idle without moving.

[TeamRealtreeHD]

I run the same setup too.... with or without a bigger radiator, cubs will run warmer than a stock jugged bike. Just know when it's time to let 'er cool... I won't ride the heck outta mine without giving it the cool down.

 

Good luck

[firebanshee]

You might also want to put foam around the inside of your rad shroud to fill that gap between the shroud and your rad so the air is forced to go through the rad and not around it. :cool:

[ryansedy]

Thanks for the input looks like ill be alright, goin tommorow....

[KaosBanshee44]

Switch to alky and you will never have to worry about it overheating :biggrin:

[fastrthnu]

can always get an inline t-stat the goes into your rad hose.