dtcohen Posted July 2, 2009 Report Posted July 2, 2009 i just got done tearing down my 01 banshee because of a broken gear in the trans i was told it had a stroker crank in it when i got it the crank was welded like most stroker cranks are, but how can i tell exactly how much stroke it has? the cylinder has TRM engraved on it and the head has TRM PRO-GAS 21.4 engraved on it Quote
wacko2000 Posted July 2, 2009 Report Posted July 2, 2009 On the side of the crank, there will be a name and numbers. Post some pics also. Quote
dtcohen Posted July 4, 2009 Author Report Posted July 4, 2009 well the pistons have .5 mm stamped on the top along with a bunch of other numbers, I assume this means that it has been bored .5 mm over the only numers on the crank that i found were a 29L cast into the rods and a 95 engraved on one of the gears i tried to get some pics but the batteries in my camera are dead Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.