Tf705 Posted July 1, 2009 Report Posted July 1, 2009 i just got a pro design head. it has no instructions. where do the 10 little orings go? do they go over the studs before you put anything on? or after under the nuts? Quote
someone82 Posted July 1, 2009 Report Posted July 1, 2009 i just got a pro design head. it has no instructions. where do the 10 little orings go? do they go over the studs before you put anything on? or after under the nuts? over the studs, between the two plates Quote
ohiobanshee Posted July 1, 2009 Report Posted July 1, 2009 over the studs, between the two plates x2 Also put a little grease on the other o rings to help hold them in place when you put the head on. Quote
Martinm210 Posted July 2, 2009 Report Posted July 2, 2009 x2 Also put a little grease on the other o rings to help hold them in place when you put the head on. +1 or you can have a slipped o-ring which will crush the o-ring. I just did this last night and now ordering new o-rings. Careful about the o-ring placement. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.