97stageIVBansh Posted July 1, 2009 Report Share Posted July 1, 2009 i have trinity pipes k and n with lid off stock carbs, dune port, i have a 340 main jet with a dyno jet needle on the third clip from the bottom and 27.5 pilots any ideas if that feels right, it feels like the needle is right and then bogs a little, but before the dune port i already had 320 mains so idk? Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 1, 2009 Report Share Posted July 1, 2009 did you richen the oil for the break-in? that will lean out the fuel Quote Link to comment Share on other sites More sharing options...
shee4speed Posted July 1, 2009 Report Share Posted July 1, 2009 I'm thinking you need to go ahead and do a plugchop.Get them dialed in.Then go from there on your needles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.