bakersfieldturbo Posted June 5, 2009 Report Posted June 5, 2009 ok well here it is i havent rode my bike for like three weeks.. but i started it up and tryed to give it gas.. and all it did was pop like it wanted to go but it was hesatiing.. i tryed even driving and going into powerband slow but nothing .. it wouldnt go ... my mods are in my sig.. and im running super M mixture idn if its 20.1 or 50.1.. but last thing i did was take the carb off and clean it out ... but didnt touch any jets or anything... just un hooked the throttle cable.. please help.. hq. thanks Quote
Burt Reynolds Posted June 5, 2009 Report Posted June 5, 2009 (edited) It could be a number of things. did you put the carb slides in backwards? The left slide will fit into the right carb backwarsds and vice versa Check all your electrical connections/check your plugs. I even had my parking brake mess up and the elctrical connection was bad and it wouldnt let it rev The guy before me removed the brake and connected the wires and they came undone Make sure you have spark on both plugs.. Just make your self a list of things and go down it one by one. Could even be sour gas. Edited June 5, 2009 by Burt Reynolds Quote
bakersfieldturbo Posted June 5, 2009 Author Report Posted June 5, 2009 thanks bro ill check it tomorrow... any one else???? It could be a number of things. did you put the carb slides in backwards? The left slide will fit into the right carb backwarsds and vice versa Check all your electrical connections/check your plugs. I even had my parking brake mess up and the elctrical connection was bad and it wouldnt let it rev The guy before me removed the brake and connected the wires and they came undone Make sure you have spark on both plugs.. Just make your self a list of things and go down it one by one. Could even be sour gas. Quote
brugal Posted June 5, 2009 Report Posted June 5, 2009 idn if its 20.1 or 50.1.. but last thing i did was take the carb off and clean it out ... but didnt touch any jets or anything 20:1 is way to rich, 50:1 might be to lean for your shee "popping".Either way you need to get your oil to gas ratio on point. When cleaning the carbs you have to take the jets out.If theirs even a spec of dirt in those jets it will effect performance. Quote
bakersfieldturbo Posted June 6, 2009 Author Report Posted June 6, 2009 20:1 is way to rich, 50:1 might be to lean for your shee "popping".Either way you need to get your oil to gas ratio on point. When cleaning the carbs you have to take the jets out.If theirs even a spec of dirt in those jets it will effect performance. thanks bro .. ill check it out anyone else? Quote
Ineedmoney Posted June 6, 2009 Report Posted June 6, 2009 Well idk if these would help but i would check them 1. Dents \holes in the pipes or arroun tthe gaskets 2. Anyting that has to deal with airflow 3. jets 4. carbs. 5 slides 6 Pistons or rings might be bad. 7 i would check compression on bothe sides first. Quote
bakersfieldturbo Posted June 6, 2009 Author Report Posted June 6, 2009 Well idk if these would help but i would check them 1. Dents \holes in the pipes or arroun tthe gaskets 2. Anyting that has to deal with airflow 3. jets 4. carbs. 5 slides 6 Pistons or rings might be bad. 7 i would check compression on bothe sides first. thanks bro .. well the compression is good . i just did a new top end resently . im going to take the carb apart tomorrow.. i looked and i think i put the slide in backwards... and im going to clean the jets.. and check all leaks... Quote
bakersfieldturbo Posted June 6, 2009 Author Report Posted June 6, 2009 bump.????? no else knows why my banshee wouldnt want to hit power band when im driving it???? it just pings pop sand hesatates ... Quote
shee4speed Posted June 6, 2009 Report Posted June 6, 2009 so all you did was pull the carb and clean it?I assume you don't have TORS anymore.And you are still single carb,right? Quote
bakersfieldturbo Posted June 6, 2009 Author Report Posted June 6, 2009 yes all i did was take the carb off and clean it out .. .and put it back together any now no power... and im single carb... so all you did was pull the carb and clean it?I assume you don't have TORS anymore.And you are still single carb,right? Quote
bakersfieldturbo Posted June 6, 2009 Author Report Posted June 6, 2009 i just went and got new ones.. one of the old plugs on top was like really darkk... also,try a new plug. Quote
bakersfieldturbo Posted June 6, 2009 Author Report Posted June 6, 2009 fresh gas,new plugs? i just drained all the gas .. cause it didnt smell like two cycle ..smalled like pure 93 octain... so i took it out am going to refill it .. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.