Drewski Posted May 29, 2009 Report Share Posted May 29, 2009 so I decided to get a new chain and sprockets for the shee and i went with a 43 rear for the trails. I have a f*cking problem. the chain is either to tight with the adjustment on the carrier all the way up or I ad another link and it is to slack with the carrier all the way back. I am needless to say, right f*ing livid!Has anyone ever had this setup, and if you have, what's the deal. How can I fix. I don't want the chain to fly off and destroy my case. please help. Quote Link to comment Share on other sites More sharing options...
Drewski Posted May 29, 2009 Author Report Share Posted May 29, 2009 anyone? i need to go riding tomorrow Quote Link to comment Share on other sites More sharing options...
rubberneck Posted May 29, 2009 Report Share Posted May 29, 2009 Nope, i tried the exact same thing with a stock swinger, and could not get the adjustment to work either. You would need a half link to make it work which is a bad idea. or an old stretched chain. This is the main reason i have converted all my banshees to round house arms. Much more chain adjustment and it doesnt get out of alignment Quote Link to comment Share on other sites More sharing options...
Sammy Posted May 29, 2009 Report Share Posted May 29, 2009 I have a 14/44 on the stock swing arm. Quote Link to comment Share on other sites More sharing options...
xXBANSHEE_KILLAXx Posted May 30, 2009 Report Share Posted May 30, 2009 Dang dont use the 14tooth front sproket for the trails. Use a 13 tooth for better torque and its better for climbing hills. :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.