Any one use a 43 tooth rear 14 front, stock swing arm

[Drewski]

so I decided to get a new chain and sprockets for the shee and i went with a 43 rear for the trails. I have a f*cking problem. the chain is either to tight with the adjustment on the carrier all the way up or I ad another link and it is to slack with the carrier all the way back. I am needless to say, right f*ing livid!Has anyone ever had this setup, and if you have, what's the deal. How can I fix. I don't want the chain to fly off and destroy my case. please help.

[Drewski]

anyone? i need to go riding tomorrow

[rubberneck]

Nope, i tried the exact same thing with a stock swinger, and could not get the adjustment to work either. You would need a half link to make it work which is a bad idea. or an old stretched chain. This is the main reason i have converted all my banshees to round house arms. Much more chain adjustment and it doesnt get out of alignment

 

[Sammy]

I have a 14/44 on the stock swing arm.

[xXBANSHEE_KILLAXx]

Dang dont use the 14tooth front sproket for the trails. Use a 13 tooth for better torque and its better for climbing hills. :thumbsup: