xXBANSHEE_KILLAXx Posted May 24, 2009 Report Share Posted May 24, 2009 (edited) hey guys i just bought a 2000 chevy blazer. I dont like its wheels because they are standing in way too much. Is there any way i can make em stick out for really cheap. I dont have the money to spend on a new enlarged axle, i just want to make them stick out. Like the one in the pic>>>> Edited May 24, 2009 by xXBANSHEE_KILLAXx Quote Link to comment Share on other sites More sharing options...
grizzly700 Posted May 24, 2009 Report Share Posted May 24, 2009 buy offset rims. prolly not real cheap but... cheapest way to do it right Quote Link to comment Share on other sites More sharing options...
stnditup2 Posted June 9, 2009 Report Share Posted June 9, 2009 is that 4x4? Quote Link to comment Share on other sites More sharing options...
black sunshine Posted June 9, 2009 Report Share Posted June 9, 2009 Leave it alone, just put that one in your sig! :biggrin: Quote Link to comment Share on other sites More sharing options...
MikeNick Posted June 9, 2009 Report Share Posted June 9, 2009 Leave it alone, just put that one in your sig! :biggrin: :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
ny98banshee350 Posted June 9, 2009 Report Share Posted June 9, 2009 u prolly got stock tires on the truck right? get like 32x 11.50 tires and they will stick out u can lift the front of the truck by crankin the torsion bars up ull get like 2 inches mayb 1 3/4 out of that then get shackles for the rear and ull clear the 32's Quote Link to comment Share on other sites More sharing options...
03bansheeman126 Posted June 20, 2009 Report Share Posted June 20, 2009 i wouldnt suggest cranking the torsion bars that will weaken them. buy some torsion keys. you might be able to buy some offset spacers that go behind the wheel. last set of wheels i bought came with some. Quote Link to comment Share on other sites More sharing options...
kawa110 Posted June 21, 2009 Report Share Posted June 21, 2009 i have 1st gen blazer 4x4. pm me Quote Link to comment Share on other sites More sharing options...
kubis21 Posted July 15, 2009 Report Share Posted July 15, 2009 go on ebay and type in wheelspacers you can get a shit load of different offsets they run about 125-200 for a set Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 15, 2009 Report Share Posted July 15, 2009 if it's a 4x, trade for some 2wd rims, or find some at the junkyard/craigslist, and it'll sitck out. you're basically looking for the offset. that's the cheapes option i could give ya, being more reliable than spacers if you're gonna beat on them, or run big tires. and you can go +1.5 and -2" from factory ride heght witout any suspension/axle problems, factory approved. the key just keeps the bolt right, but the problem is people over crank them Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 15, 2009 Report Share Posted July 15, 2009 to you race somewhere where people use mirrors? otherwise your banshee just says pee-pee Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.