stock or 35mm carbs

[fast shee]

Sent my cylinders out for porting and will not be ready for the race this weekend. Need to know if anyone has run 35mm carbs on stock ported cyls with 4mil stroker crank, t5s, timing plate,vf3, 18cc domes, etc or will I be better off finding some stockers to run instead. Dont know if iI will lose power over stock carbs. I know it is overkill but not much choice being last second.

[GrMeyer]

umm a builder should be able to help you out on what kind of rpm you will be in most of the time...most of the 4mil drag bikes i see have 35's but if your doing alot of low end to mid riding i would prob have to say 33's but 35's leave room for more upgrades

[TwistedSheeRida]

i dont even think you need to go that big 33mm a 30 would prob be just fine

[fast shee]

Think I was un clear about the cylinders. They are stock cylinders unported ( factory ). Had a spare set to use while I wait for the others to return from builder. Thinking that I might lose power with the 35s.