Jump to content

Possible Reed problem?


Recommended Posts

I posted another topic about spitting and cutting out at full out.......

 

not sure still whats going on.........

 

The bike spitts and cutts out at full throttle and nothing except race gas was the change for the last ride..

 

Any chance a worn out or bad reed would cause this?

 

FYI, the bike runs great at iddle and mid band, but full out is choking out ..

 

Also, its seems to get much better after it warms up.

 

Thought?/

 

thanks ya'll

Link to comment
Share on other sites

I posted another topic about spitting and cutting out at full out.......

 

not sure still whats going on.........

 

The bike spitts and cutts out at full throttle and nothing except race gas was the change for the last ride..

 

Any chance a worn out or bad reed would cause this?

 

FYI, the bike runs great at iddle and mid band, but full out is choking out ..

 

Also, its seems to get much better after it warms up.

 

Thought?/

 

thanks ya'll

 

You might as well take those bad mamajamas out an check em, gaskets are only a few bucks. Just make sure they close all the way and have no cracks.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...