ADRENALINE ENTERPRISES Posted April 26, 2009 Report Posted April 26, 2009 i have powdercoated my frame and now i forgot the location of the vin# and dont want to remove powder coat unless i know the exact location its a 1995 bbanshee can any one help with exact location or a picture of location. Quote
2001Stroker Posted April 26, 2009 Report Posted April 26, 2009 Right under the stator, on the frame. Quote
ADRENALINE ENTERPRISES Posted April 26, 2009 Author Report Posted April 26, 2009 Right under the stator, on the frame. on the rear or more foward is it on the roun d part or flat part towards back top of tube or under ? dont mean to sound like idiot but want to only remove pc wheare needed to reveal # Quote
kawiking Posted April 26, 2009 Report Posted April 26, 2009 somebody needs to post u a pic.. that will help Quote
rubberneck Posted April 26, 2009 Report Posted April 26, 2009 Ok man, got the measurements. Measure forward from the centerline of the front bolt hole for the footpeg. 4.25" is the rear edge of the vin, and 7" will be the front edge of the vin. Scrape the PC off between those 2 marks and you should be good to go. The front edge or 7" mark is just about centered below the stator. You can see the bare spot on my frame in this pic Quote
ADRENALINE ENTERPRISES Posted April 26, 2009 Author Report Posted April 26, 2009 Ok man, got the measurements. Measure forward from the centerline of the front bolt hole for the footpeg. 4.25" is the rear edge of the vin, and 7" will be the front edge of the vin. Scrape the PC off between those 2 marks and you should be good to go. The front edge or 7" mark is just about centered below the stator. You can see the bare spot on my frame in this pic thanks alot guys you rock i found it off to get stickers for black river falls wi memorial weekend thanks again!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.