vwpartsman Posted April 24, 2009 Report Share Posted April 24, 2009 I have a complete Banshee 7 Mill topend Comes with v force 2 reeds, rubber intakes for 40MM carbs, head, domes, cylinders, pistons, and all nuts and bolts and orings for installation Has had new liners put in them with 1 weekend of racing so the bore is 72MM. Ported by packard. Setup for alcohol Everything is polished. Best time was 3.81 One piston looks like it has a minor cold sieze on the intake side of it. Was running when taken apart so you could run it like it is or replace the one piston. $850 shipped Quote Link to comment Share on other sites More sharing options...
vwpartsman Posted April 25, 2009 Author Report Share Posted April 25, 2009 up Quote Link to comment Share on other sites More sharing options...
jaydun323 Posted April 25, 2009 Report Share Posted April 25, 2009 7mm bore or stroke? TREX has alot of different options. Quote Link to comment Share on other sites More sharing options...
krazy_sw Posted April 25, 2009 Report Share Posted April 25, 2009 Ill give you 500 shipped for it Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted April 25, 2009 Report Share Posted April 25, 2009 Ill give you 500 shipped for it Dude that's just an insult of an offer IMO. Quote Link to comment Share on other sites More sharing options...
vwpartsman Posted April 25, 2009 Author Report Share Posted April 25, 2009 Topend is for a 7 mill stroke and its at 72MM bore which is the bore when you get them. lots of life left in the liners. I'll pass on the $500 offer Quote Link to comment Share on other sites More sharing options...
krazy_sw Posted April 26, 2009 Report Share Posted April 26, 2009 what about 650 shipped Quote Link to comment Share on other sites More sharing options...
vwpartsman Posted April 26, 2009 Author Report Share Posted April 26, 2009 $750 and you have a deal Quote Link to comment Share on other sites More sharing options...
Darthwall Posted April 26, 2009 Report Share Posted April 26, 2009 $750 and you have a deal give this guy a fair price I know 7mm stuff is hard to get rid of but a 3.81 is damn good packard is no cheap company to go through Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted April 26, 2009 Report Share Posted April 26, 2009 $750 and you have a deal These cylinders cost a pretty penny brand new out of the box no porting... $1800 +. So 750 already ported with v force reeds and new sleeves,this is a damn good deal as it sits. Just the cost of re-sleeving and port matching ranges 4-500. Bump for ya bro! Quote Link to comment Share on other sites More sharing options...
krazy_sw Posted April 26, 2009 Report Share Posted April 26, 2009 will it work with a 4 mil crank Quote Link to comment Share on other sites More sharing options...
vwpartsman Posted April 26, 2009 Author Report Share Posted April 26, 2009 will it work with a 4 mil crank You would have to have the cylinder milled down to fit the 4 mill crank to make your port timings come out right. So yes it could but not like it is right now Quote Link to comment Share on other sites More sharing options...
vwpartsman Posted April 27, 2009 Author Report Share Posted April 27, 2009 SOLD!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.