12mm Posted April 2, 2009 Report Posted April 2, 2009 Does anyone have a pic of a MODDED shift star ? i have a spare one and wanted to try it out and see if it will allow me to shift better. if there are no pic then can someone tell me what needs to be done to it ? Quote
sheerider1026 Posted April 2, 2009 Report Posted April 2, 2009 if you do a search you may find a picture that way.. basically you take and cut the tips of the star.. instead of being tall and pointy, you make them low and rounded over the top... you will notice there are pins sticking out of the side of the star, i usually cut the points of the star down to where they are 1/16" or so above these pins.. hope that makes sense.. you can use a bench grinder.. its very easy to do.. Quote
swrbansheeboy Posted April 2, 2009 Report Posted April 2, 2009 heres a couple pics.... just notice that the tip between 1'st and 6'th doesnt need to be ground off... Quote
MILO Posted April 2, 2009 Report Posted April 2, 2009 (edited) you're in luck! i haven't finished my clutch and put the side cover on yet. the only difference i can see is it's ground out around where it would catch on the eccentric shaft. Edited April 2, 2009 by MILO Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.