studroes Posted April 2, 2009 Report Posted April 2, 2009 ok when i got my banshee last summer the guy didnt have any paperwork with it and i need to have the vin # to register it. my question is where is it located? the frame is painted so i dont wanna go rubbing off paint until i know for sure where its gonna be Quote
AKheathen Posted April 2, 2009 Report Posted April 2, 2009 on the frame directly under the stator Quote
studroes Posted April 4, 2009 Author Report Posted April 4, 2009 is there a seperate plate or are the #'s grooved right in the frame on all banshees? Quote
MistBanshee Posted April 4, 2009 Report Posted April 4, 2009 (edited) On the frame, left side! :biggrin: The number plate that is also there is the engine number. Edited April 4, 2009 by MistBanshee Quote
studroes Posted April 7, 2009 Author Report Posted April 7, 2009 ok i started to use a wire wheel in my drill to take the paint off and i did a strip about 4 inches long and still found no #'s. they are on the lowest bar on the frame right? i did some between the left footpeg and the down bar where the motor mounts bolt on and then some between the down bar and the lower a-arm mount and found nothing. any clues or suggestions? Quote
skinindustries Posted April 8, 2009 Report Posted April 8, 2009 It is on the left side of the bike on the bottom frame rail right under your shifter lever. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.