sparkyjohn Posted April 1, 2009 Report Share Posted April 1, 2009 hi everyone my first post, i have a 2002 banshee and all fine untill i rolled it onto its side! now it wont rev at all it starts and idles fine but when i go to rev it it just make a deep sound and does nothing , i have taken carbs apart and cleaned them put it back together and when i did it fired up fine and reved as it should for a couple of times then went back to no revs! so then i tried disconecting the TORS system i took out the black box plug the thumb plug and the two on the carbs and it did the same ran great for about a minute then went back to no revs. also i am noticing that when i go to rev it i get spits of feul out of the exaust. can anyone help? Quote Link to comment Share on other sites More sharing options...
AKheathen Posted April 1, 2009 Report Share Posted April 1, 2009 did you unplug the e-brake plug on the clutch pertch? Quote Link to comment Share on other sites More sharing options...
Ineedmoney Posted April 2, 2009 Report Share Posted April 2, 2009 take it somewhere if u want to know what is wrong wiht it quickly. Also dotn roll it over again. Quote Link to comment Share on other sites More sharing options...
sparkyjohn Posted April 2, 2009 Author Report Share Posted April 2, 2009 yes !! it worked i unplugged the e brake on the clutch and it came back to life! but what do i do now? all those bits are unplugged do they need to go back in? Quote Link to comment Share on other sites More sharing options...
Corndiddly5885 Posted April 2, 2009 Report Share Posted April 2, 2009 yes !! it worked i unplugged the e brake on the clutch and it came back to life! but what do i do now? all those bits are unplugged do they need to go back in? thats the same thing that happen to me is that the ebrake got f'd up.i just to it off cuz i never use it. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted April 2, 2009 Report Share Posted April 2, 2009 haha, mine broke off, and never gave me any problems :biggrin: you don't need it. It's just there to remind you if the e'brake is set. i just park in gear anyways, because the cable can stick Quote Link to comment Share on other sites More sharing options...
sparkyjohn Posted April 2, 2009 Author Report Share Posted April 2, 2009 haha, mine broke off, and never gave me any problems :biggrin: you don't need it. It's just there to remind you if the e'brake is set. i just park in gear anyways, because the cable can stick ok good stuff what about the tors system? shall i leave it unplugged? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.